User Manual

8 Configuration
46
8.5 Outputs “OutP”
Configuration of the instrument outputs are subdivided into analog outputs (OutA;
max. 2) and binary outputs (OutL; max. 9). Binary outputs are relay, solid-state relay
and logic outputs. Display and numbering of the outputs depends on the assignment
of the option slots.
Numbering of the
outputs
Standard for all instrument versions:
(Binary) output 1 = relay
(Binary) output 2 = relay
(Binary) output 3 = logic output
(Binary) output 4 = logic output
Extended numbering for the option slots:
The switching states of the binary outputs 1—6 are shown in the display.
Configuration
Analog inputs
Controller
Generator
Limit comparators
Outputs
Binary functions
Display
Timer
Interfaces
Slot Plug-in board with
1 analog output
Plug-in board with
1 binary output
Plug-in board with
2 binary outputs
Option 1 Output 5 Output 5 Output 5+8
Option 2 Output 6 Output 6 Output 6+9
Option 3 Output 7 Output 7 Output 7+10