User Manual

8 Configuration

The states Z1 and Z2 are assigned to the

binary functions in descending order (see

list on the right), i. e. the first binary

function selected in the list is Z1.

Example:

The setpoint is to be selected via a binary

input and the state of one limit comparator.

This results in the following assignment:

Z1 - binary input 1

Z2 - limit comparator 1

The binary function for the binary input 1

and limit comparator 1 have to be

configured to “setpoint switching”

Depending on the further configuration, the

following diagram applies:

* An exception to this is the configuration for a program controller with external setpoint input, with

or without correction. Setpoint 2 is the program setpoint in this case.

Additional

functions via the

setup program

Several binary functions can be combined through the setup program. In addition, the

binary function “Text display” can be implemented. This is used to show a letter

combination in the lower display.

* only for program controller/generator