User Manual

6 Operation
24
6.4.3 Binary output 1
6.4.4 Binary output 2
Parameter Display Setting range
1
Switching function
(for switching output only)
Hysteresis, make contact
Hysteresis, break contact
Window, make contact
Window, break contact
See section 7.10 "Setting the switching function
(B.Fct)", page 37.
Switching point
(for switching output only)
0.00 ... 100.00% of nominal measuring range
See section 7.10 "Setting the switching function
(B.Fct)", page 37.
Reset point
(for switching output only)
0.00 ... 100.00% of nominal measuring range
See section 7.10 "Setting the switching function
(B.Fct)", page 37.
Hysteresis
(for switching output and
configured switching point
or reset point only)
0.00 ... 100.00% of nominal measuring range
See section 7.10 "Setting the switching function
(B.Fct)", page 37.
Note:
Used only with window switching functions.
Switching delay
(for switching output only)
0.00 ... 99.99 s
See section 7.10 "Setting the switching function
(B.Fct)", page 37.
Parameter Display Setting range
1
Switching function
(for second switching
output only)
Hysteresis, make contact
Hysteresis, break contact
Window, make contact
Window, break contact
See section 7.10 "Setting the switching function
(B.Fct)", page 37.
Switching point
(for second switching
output only)
0.00 ... 100.00% of nominal measuring range
See section 7.10 "Setting the switching function
(B.Fct)", page 37.
Reset point
(for switching output only)
0.00 ... 100.00% of nominal measuring range
See section 7.10 "Setting the switching function
(B.Fct)", page 37.
Hysteresis
(for second switching
output and configured
switching point or reset
point only)
0.00 ... 100.00% of nominal measuring range
See section 7.10 "Setting the switching function
(B.Fct)", page 37.
Note:
Used only with window switching functions.
1
The default setting is marked in bold.