User Manual

7 Commissioning
28
parameter level.
7.3 Cancel operation
✱ Press and hold the combination tool (2) longer than 3 seconds or
✱ wait for timeout (no activity for longer than 60 seconds).
7.4 Selecting the unit of the measured value (Uni.P)
✱ Unlock the instrument, See section 7.2 "Unlocking the instrument (code
entry)", page 27.
✱ "Rotate" until the bottom line shows "Uni.P".
✱ "Press"
✱ The measured pressure is shown in millibar.
✱ "Press"
The measured pressure is shown in bar.
After an incorrect code is entered:
Flashing
Continuous