User Manual

41
7 Commissioning
7.14 Setting the switching delay (B.DLY)
Setting range: 0.00 to 99.99 s
Factory setting: 0.00 s
Setting ✱ Unlock the instrument, See section 7.2 "Unlocking the instrument (code
entry)", page 27.
✱ "Rotate" until the bottom line shows "B.DLY".
✱ "Press"
7.15 Setting the display alignment (D.Dir)
Setting range: std = standard = instrument upright
turn = turned = instrument overhead
Factory setting: std
Setting ✱ Unlock the instrument, See section 7.2 "Unlocking the instrument (code
entry)", page 27.
✱ "Rotate" until the bottom line shows "D.Dir".
✱ "Press"
or
Enter the value "digit by digit."
"0" flashes
Continuous