User Manual

7 Commissioning

Example

3.40nA = For underrange

error signal = 0 mA for measuring range 0 ... 20 mA

error signal = 3.4 mA for measuring range 4 ... 20 mA

error signal = 0 V for measuring range 0 ... 10 V

22nA = For overrange

error signal = 22 mA for measuring range 0 ... 20 mA

error signal = 22 mA for measuring range 4 ... 20 mA

error signal = 10.7 V for measuring range 0 ... 10 V

7.10 Setting the switching function (B.Fct)

General The response of the instrument's switching output can be selected:

- Hysteresis make contact

- Hysteresis break contact

- Window function make contact

- Window function break contact

7.10.1 Hysteresis

Relay behavior

Setting ✱ Unlock the instrument, See section 7.2 "Unlocking the instrument (code

entry)", page 27.

✱ "Rotate" until the bottom line shows "B.Fct".

✱ "Press"