User Manual

39
7 Commissioning
2 = Window function make contact
3 = Window function break contact
7.11 Setting the switching point (B.SP)
See section 7.10 "Setting the switching function (B.Fct)", page 37.
Setting range: 0 to 100% of the nominal measuring range
Factory setting: 50% of the nominal measuring range
Setting ✱ Unlock the instrument, See section 7.2 "Unlocking the instrument (code
entry)", page 27.
✱ "Rotate" until the bottom line shows "B.SP".
✱ "Press"
B.RSp
1
p
B.Sp
0
B.Hys
B.Hys
B.RSp
1
p
B.Sp
0
B.Hys
B.Hys
Enter the value "digit by digit."
"-" Flashing
Continuous