User Manual

9 Setup program

✱ Install the setup program software on the notebook / PC.

✱ Screw the connecting cable (b) onto the plug of the pressure switch (2).

✱ Connect the USB/TTL converter (3) to the connecting cable (b) and PC

interface line (gray) (c).

✱ Connect the PC interface line (gray) (c) to the notebook (4).

✱ Connect the cable (a) to the power supply (1) and connecting

cable (b).

9.2 Start the setup program

Start / Programs / JUMO instruments / Setup program JUMO DELOS K, SI,

During the installation, the driver for the USB/TTL converter is also

installed on the PC.

(2)

(1)

(3)

(4)

(a)

(b)

(c)

DC 24 V