User Manual

5 Operation
34
5.2 LCD display
5.2.1 Measuring mode (normal display)
Example:
The LCD display is lit yellow.
5.2.2 Setting mode
Example:
The LCD display is lit red.
Operation
Continue Press the combination tool for less than 1 second (< 1s)
Yes (take-over) Press the combination tool for less than 1 second (< 1s)
No (cancel) Press the combination tool for more than 3 seconds (> 3s)
Time out no action for more than 60 seconds (> 60 s)
TIP!
To change over from the setting mode to the measuring mode:
- "No" (Cancel) or
- Wait for "Timeout" = No actions for 60 seconds.