User Manual

5 Operation
38
5.4.3 Binary output 1
Parameters Display Setting range
1
1
The standard setting is displayed bold.
Switching function = Hysteresis, N/O contact
= Hysteresis, N/C contact
= Window, N/O contact
= Window, N/C contact
 Chapter 6.12 "Setting the switching function
(B.Fct)", page 55
Switching point 100 °C
 Chapter 6.12 "Setting the switching function
(B.Fct)", page 55
Release point 90 °C
 Chapter 6.12 "Setting the switching function
(B.Fct)", page 55
Hysteresis
(only with configured
switching point and
release point)
0to1 to 500 °C
 Chapter 6.12 "Setting the switching function
(B.Fct)", page 55
Note:
Application exclusively with window switching
functions.
Switch-on delay 0.00 to 99.99 s
 Chapter 6.12 "Setting the switching function
(B.Fct)", page 55