User Manual

7 Setup program

7.1 General information about the setup program

The setup program optionally available permits a comfortable and clearly structured setting of

the large number of device parameters. Settings made once can be saved on a data carrier as

a file and transmitted one to one to several devices.

Configurable parameters

Depending on the device, it is possible to set, for example:

• Measuring range and range limits

• Output behavior in the event of an overrange or underrange

• Functions of the K1 and K2 switching outputs

 Chapter 3 "Electrical connection", page 21

Connection

TIP!

For configuration, the device must be connected to the power supply.

(1) Rated voltage supply DC 24 V (2) Device

(3) USB/TTL converter

included in VARTN 70/00456352

(4) Notebook/PC

(a) Cable box 4-pin (straight) M 12x1

with PVC connection cable length 2000 mm

VARTN 40/00404585 or

Cable box 4-pin (angled) M 12x1

with PVC connection cable length 2000 mm

VARTN 40/00409334

(b) Connection cable (Y cable)

VARTN 70/00507861

Part of (3)