User Manual

71
9 Supplement
9.1 Technical data
9.1.1 General information
9.1.2 Input
Electrical connection Machine connector M 12x1, 4-pin as per IEC 60947-5-2
Process connections Screw connection G 1/4, G 3/8 and G 1/2
Screw connection M 12x1.5; M 18x1.5 and M 20x1.5
Screw connection 1/2-14NPT
Union nut G 3/8
Pipe screw connection G 1/4 and G 1/2
Screw connection G 1/2 with CIP-conforming sealing cone and EHEDG certificate
Conical port with union nut (milk pipe union)
Clamp
Spherical welding socket with clamp screw connection
Welding socket with CIP-conforming sealing cone
Varivent connections with EHEDG certificate
JUMO PEKA with EHEDG certificate
Sheath Stainless steel 316 L Material No. 1.4404/1.4435
Stainless steel 316 Ti Material No. 1.4571
Protection rating IP65 as per DIN EN 60529 with the machine connector inserted
Response time t
0.5
: 3 s in water 0.4 m/s
t
0.9
: 8 s in water 0.4 m/s
Measuring insert Pt1000 temperature probe, DIN EN 60751, class A or AA (1/3 DIN B), 4-wire circuit
Reference conditions DIN 16086 and DIN EN 60770
Display positively lit LCD display
Alignment The display can be mirror-imaged by 180° using the setup program
after installation, the display case can be swivelled to the LH or RH side by ± 160°
(use the combination tool)
Size Display 16 x 26 mm / font size 7 mm / 2x 4-digit
Color Standard operation: amber
Error: red (text "Err", error code 1 to 9 flashes)
Setup interface occupied: red
Switching status display K1, K2
Temperature unit °C or °F
Operation
on the device with the rev transmitter beneath the locking screw with combination tool or screwdriver
0.5 x 3 mm or Allen key, width across flats 2
with PC with the setup program with PC interface
Measuring input 1x Pt1000 temperature probe, 4-wire circuit
Measuring range Basic type 902940/10: -50 to +150 °C
Basic type 902940/30: -50 to +260 °C
Basic type 902940/50: -50 to +500 °C
Limit value deviation 0.15 + 0.002 x t, class A
0.10 + 0.017 x t, class AA (1/3 DIN B)