Datasheet

2014-09-01/00578870
Data sheet 703571 Page 3/21
JUMO GmbH & Co. KG Telefon: [phone]
Hausadresse: Moritz-Juchheim-Straße 1, 36039 Fulda, Germany Telefax: [phone]
Lieferadresse: Mackenrodtstraße 14, 36039 Fulda, Germany E-Mail: [e-mail]
Postadresse: 36035 Fulda, Germany Internet: www.jumo.net
Recording function (extra code)
Four analog channels and three digital chan-
nels can be recorded. They appear as line re-
corders with a time stamp. The recorder image
is always present. It is only possible to use the
"history" function and to extract the registry
data via PCC, PCA by means of the extra code
213 recording function.
Setup program
The setup program makes the controller easy
to configure and parameterize using a PC.
Data sets can thus be created, edited, and
transferred to the controller, and can be ex-
tracted from there. The data can be saved and
printed. The setup program supports multiple
national languages, including German, Eng-
lish, and French.
External relay or logic modules
ER8 (accessories)
By connecting two ER8 external logic mod-
ules, eight relay or digital outputs (12 V/20 mA)
can be added to the device in each case. The
control takes place via interface RS422/
RS485. The setup program is essential for the
configuration of the ER8 module that is mount-
able on the DIN-rail. Two ER8 modules can be
connected.