Manual

35
8 Parameterization
8 Paramet erizatio n
The default settings are shown in bold in the following tables.
Process data
Identification
Monitoring
Parameter
Parameter Default setting Description
Measured value – Display of the current measured val-
ue in percent.
Scaling 1 Display of scaling of measured value
State of switching output 1 (OU1) Off Display of current switching status of
output 1 (OU1).
State of switching output 2 (OU2) On Display of current switching status of
output 2 (OU2).
Device hardware fault False Displays whether there is a device
hardware fault.
Parameter error False Displays whether there is a parame-
ter error.
Auto-calibration error False Displays whether an error has oc-
curred during auto-calibration.
Pollution degree False Displays whether pollutants are de-
tected.
Parameter Default setting Description
Application-specific TAG – For identification of specific applica-
tion, function and operating location
with up to 32 characters (alpha-nu-
meric and special characters).
Function TAG –
Location TAG –
Parameter Default setting Description
Measured value - Display of the current measured val-
ue in %.
State of switching output 1 (OU1) Off Display of current switching status of
output 1 (OU1).
State of switching output 2 (OU2) On Display of current switching status of
output 2 (OU2).
Device hardware fault False Displays whether there is a device
hardware fault.
Parameter error False Displays whether there is a parame-
ter error.
Auto-calibration error False Displays whether an error has oc-
curred during auto-calibration.
Pollution degree No biofilm detected Displays whether pollutants have
been detected.
Pollution value - Display of current pollution value.
Parameter Default setting Description
Configuration Standard, user Sets the scope of configuration op-
tions.