Manual

8 Parameterization
36
Reset configuration settings – Button for resetting the configuration
that has been made.
Switching channel 1, output signal IO-Link, PNP, NPN, push-
pull, push-pull PWM
Setting according to variant ordered,
see order code.
Switching channel 1, limit value/
window HIGH (SP1/FH1)
Input range:
0 to 100.0 % (25)
Sets the limit value that must at least
be available to change the switching
status.
Input range value > switching chan-
nel value 1 release point/window
Low (rP1/FL1)
Switching channel 1, switching be-
havior (OU1)
High-active (MAX, HNC,
FNC), low-active (MIN,
HNO, FNO)
Setting of the switching behavior as
high- or low-active.
Switching channel 1, mode Single point, window (FH,
FL), two point
–
Switching channel 1, hysteresis Input range:
0 to 100.0 % (0)
–
Switching channel 1, release point/
window low (rP1/FL1)
Input range:
0 to 100.0 % (–)
Input range value < switching chan-
nel value 1 limit value / window HIGH
(SP1/FH1)
Switching channel 1, switching de-
lay time (ds1)
Input range:
0.3to60s(0.5)
Time display in 0.1-second steps.
Switching channel 1, release delay
time (dr1)
Input range:
0,3 bis 60 s (1.0)
Time display in 0.1-second steps.
Switching channel 1 pulse width
modulation (PWM) – period time
50 to 1000 ms (–) Period duration in relation to mea-
sured value.
Switching channel 2, output signal PNP, NPN, push-pull Setting according to variant ordered,
see order code.
Switching channel 2, limit value/
window HIGH (SP2/FH2)
Input range:
0 to 100.0 % (25)
Input range value > switching chan-
nel value 2 release point/window
Low (rP2/FL2)
Switching channel 2, switching be-
havior (OU2)
High-active (MAX, HNC,
FNC), low-active (MIN,
HNO, FNO)
–
Switching channel 2, mode Single point, window (FH,
FL), two point
–
Switching channel 2, hysteresis Input range:
0 to 100.0 % (0)
–
Switching channel 2, release point/
window Low (rP2/FL2)
Input range:
0 to 100.0 % (–)
In
pu
t range value < switching chan-
nel value 2 limit value/window HIGH
(SP2/FH2)
Switching channel 2, switching de-
lay time (ds2)
Input range:
0.3to60s(0.5)
Time display in 0.1-second steps.
Switching channel 2, release delay
time (dr2)
Input range:
0,3 bis 60 s (1.0)
Time display in 0.1-second steps.
Switching channel 2 pulse width
modulation (PWM) – period time
50 to 1000 ms (–) Period duration in relation to mea-
sured value.
Teach function selection Switching channel 1,
switching channel 2
Selection of output channel on which
the teach function is to have an ef-
fect.
Parameter Default setting Description