Instructions

47
7 Configuration
➔ LIMITC 1 (limit comparator 1) ➔
➔ LIMITC 2 (limit comparator 2) ➔
➔ LIMITC 3 (limit comparator 3) ➔
➔ LIMITC 4 (limit comparator 4) ➔
Parameter Value/
Selection
Description
Function FUNCTION 0
1
2
3
4
5
6
7
8
no function
lk1
lk2
lk3
lk4
lk5
lk6
lk7
lk8
Limit value LIMVALUE -19999…
0 …
99999
Limit value to be monitored
(see limit comparator functions lk1...lk8:
limit value AL)
Hysteresis HYSTERES 0… 1 …
99999
Switching differential in respect to the limit
value
(see limit comparator functions lk1...lk8:
hysteresis HySt)
Fixed limit
comparator
setpoint value
FIXLCVAL -19999…
0 …
99999
A fixed setpoint value can be set for the
limit comparator (lk1...lk6).
The limit comparator setpoint value
LCSETVAL must be deactivated for the
fixed setpoint value to be active.
Action/
Range response
ACT-RESP 0
1
2
3
absolute/off
relative/off
absolute/on
relative/on
Defines the switching action of the limit
comparator and the switch status for an
overrange or underrange (signal at „Out of
Range“).
See description on page 49.
Switch-on delay ON DELAY 0 …9999 Delays the switch-on edge by a definable
time period (time in seconds).
Switch-off delay OFFDELAY 0 …9999 Delays the switch-off edge by a definable
time period (time in seconds).
Factory settings are shown bold .