Datasheet

Page 1/3
JUMO GmbH & Co. KG
Delivery address:Mackenrodtstraße 14,
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM 20 2TT, UK
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
Internet: www.jumo.co.uk
JUMO PROCESS CONTROL INC.
885 Fox Chase, Suite 103
Coatesville PA 19320, USA
Phone: [phone]
1-800-554-JUMO
Fax: [phone]
e-mail: [e-mail]
Internet: www.JumoUSA.com
Data Sheet 70.1050
Block structure
Key features
k Heating or cooling is configurable
k Limit monitoring
k Available for resistance thermometer,
thermocouple, standard current or
voltage signals, according to choice
k 10A relay (changeover contact)
k Adjustable switching hysteresis
k Simple, space-saving installation
k Time-delayed switch-on after
power-on is selectable, e.g. for
staggered starting of several
equipment units
k 3-digit LC display with special
characters for °C and °F
k Parameter level protected by code
k Setup program for configuration and
archiving via PC
k Customized linearization via tabular
function in the setup program
k UL approval applied for
Digital Thermostat
with LC display for mounting on a 35mm DIN rail
Brief description
The JecoTRON T is a compact digital thermostat in 90mm x 22.5mm format for sim-
ple temperature control (heating or cooling). The measurement input permits the connec-
tion of resistance thermometers or thermocouples, or standard current or voltage signals.
The measured value is shown on a 3-digit LC display.
The switching status of the relay K1 is indicated by an LED.
The instrument is operated from 3 keys on the front panel. The electrical connection is
made via screw terminals.
A setup program and a PC interface are available as accessories, for easy configuration
and parameterization from a PC.
Type 701050/ ...
09.04/00440441
Displays and controls
LC display 3-digit segment display with symbols for the temperature unit,
6mm high
Status
indication
LED K1 lights up when the output relay is energized.
Keys programming
increase setpoint or parameter value (dynamically)
decrease setpoint or parameter value (dynamically)
Setup
interface
The instrument is linked to a PC via a PC interface with TTL/RS232
converter and adapter (3-pin).