Datasheet

Page 1/4
JUMO GmbH & Co. KG
Delivery address:Mackenrodtstraße 14,
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM 20 2TT, UK
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
Internet: www.jumo.co.uk
JUMO PROCESS CONTROL INC.
885 Fox Chase, Suite 103
Coatesville PA 19320, USA
Phone: [phone]
1-800-554-JUMO
Fax: [phone]
e-mail: [e-mail]
Internet: www.JumoUSA.com
Data Sheet 70.1060
Block structure
Key features
k Integrated defrosting function
k Heating or cooling is configurable
k Limit monitoring
k Available for resistance thermometer,
thermocouple, standard current or
voltage signals, according to choice
k Choice of a 10A relay or
two 5 A relays
k Adjustable switching hysteresis
k Time-delayed switch-on after
power-on is selectable, e. g. for
staggered starting of several
equipment units
k Operating hours counter
k Symbols for operating modes, °C, °F,
hours, minutes and seconds in display
k Parameter level protected by code
k Setup program for configuration and
archiving via PC
k Customized linearization via tabular
function in the setup program
k UL approval applied for
Electronic Microstat
76 x 36 mm format
Brief description
The J ecoTRON M is a compact, digital electronic thermostat for simple temperature
control (heating or cooling). The measurement input permits the connection of resistance
thermometers or thermocouples, or standard current or voltage signals. The measured
value is shown on a 3-digit backlit display. The switching states of relays K1 and K2 are
indicated by two LEDs.
The instrument incorporates a simple defrosting function as well as an operating hours
counter, which can, for instance, be used to record the operating time of a cooling
compressor.
The instrument can be operated from 4 keys on the front panel. The electrical connection
is made via screw terminals on the back of the instrument.
A setup program and a PC interface are available as accessories, for simple configuration
and parameterization from a PC.
Type 701060/XX2...
09.04/00440437
Displays and controls
LC display 3-digit segment display, 13 mm high, and symbols for temperature
unit, h, min, s, defrosting and heating, with red background lighting
Status
indication
LED K1/K2 lights up when relay K1/K2 is energized.
LED K1/K2 goes out when relay K1/K2 is de-energized.
Keys
for start-stop
programming
increase parameter value
decrease parameter value
Setup
interface
The instrument is linked to the PC via a PC interface with TTL/RS232
converter and adapter (3-pin).