Datasheet

V3.00/EN/00542385
Data Sheet 701155 Page 5/19
70115500T10Z000K000
-802*PE+&R.*
'HOLYHU\DGGUHVV 0DFNHQURGWVWUDH
)XOGD*HUPDQ\
3RVWDODGGUHVV )XOGD*HUPDQ\
3KRQH 
)D[ 
(PDLO PDLO#MXPRQHW
,QWHUQHW ZZZMXPRQHW
-802,QVWUXPHQW&R/WG
-802+RXVH
7HPSOH%DQN5LYHUZD\
+DUORZ(VVH[&0'<8.
3KRQH 
)D[ 
(PDLO VDOHV#MXPRFRXN
,QWHUQHW ZZZMXPRFRXN
-8023URFHVV&RQWURO,QF
0\HUV5RDG
(DVW6\UDFXVH1<86$
3KRQH 
)D[ 
(PDLO LQIRXV#MXPRQHW
,QWHUQHW ZZZMXPRXVDFRP
Display and control elements
1. The limit value exceedance is indicated by the installed LEDs K1 and K2 (red) for each channel, and the safety–relevant relay output alarm (terminal 14 and 16)
switches the system to a safe operating status (alarm range).
Galvanic isolation
Legend Comment
3 LCD display
Black/white with background lighting, 96 x 64 pixels
6LED KV (yellow)
Is lit if the pre-alarm is triggered
7 LED KD (yellow)
Is lit if the diagnostic processor has performed a switch-off
8Keys
(can only be operated when the transparent hood is folded upward)
Increase value, Decrease value
Programming
RESET
12 Setup interface
13 LED K2 (red)
1
Is always simultaneously lit with K1 when errors occur
on analog input 1 or 2 or in the event of limit value exceedance
14 LED K1 (red)
1
Is always simultaneously lit with K2 when errors occur
on analog input 1 or 2 or in the event of limit value exceedance
15 LED OK
Green: valid range
Off: error occurred
Test voltages:
(1) Analog inputs
(3) Digital input
(5) Setup interface
(6) Display
(7) Analog output
(8) Voltage supply
(2) Alarm relay output
(4) Pre-alarm relay output
(3)
(6)
(7)
(8)
(12)
(13)
(14)
(15)