Datasheet

Page 1/4
JUMO GmbH & Co. KG
Delivery address:Mackenrodtstraße 14,
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM 20 2TT, UK
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
Internet: www.jumo.co.uk
JUMO PROCESS CONTROL INC.
885 Fox Chase, Suite 103
Coatesville PA 19320, USA
Phone: [phone]
1-800-554-JUMO
Fax: [phone]
e-mail: [e-mail]
Internet: www.JumoUSA.com
Data Sheet 70.1540 (95.1540)
Block structure
Key features
k Limit monitoring
k Available for resistance thermometer,
thermocouple, standard current or
voltage signals, according to choice
k 10A relay (changeover contact)
k Adjustable switching hysteresis
k Programmable switch-on delay
after power-on
k Configurable alarm suppression
k Symbols in display for temperature unit,
minutes and seconds
k Parameter level protected by code
k Setup program for configuration and
archiving via PC
k Customized linearization via tabular
function in the setup program
k UL approval applied for
Digital Indicator
76mm x 36mm format
Brief description
The J di eco compact digital indicator is used for the simple visualization of tempera-
tures or standard signals. The measurement input permits the connection of resistance
thermometers or thermocouples, or standard current or voltage signals. The measured
value is shown on a 3-digit backlit display.
Limit infringements are monitored by means of a 10A relay (changeover contact) and in-
dicated by an LED.
The 3 keys on the front panel can be used to configure, among others, the switching hys-
teresis and alarm suppression.
The electrical connection is made via screw terminals on the back of the instrument.
A setup program and a PC interface are available as accessories, for simple configuration
and parameterization from a PC.
Type 701540/...
09.04/00440445
Displays and controls
LC display 3-digit segment display, 13 mm high, and symbols for temperature
unit, h, min and s, with red background lighting
Status indication LED K1 flashes during alarm suppression
LED K1 lights up when limits are infringed, or on a probe error
Keys
programming
increase parameter value
decrease parameter value
version display
exit, jump to basic status (temperature indication)
Setup
interface
The instrument is linked to the PC via a PC interface with
TTL/RS232 converter and adapter (3-pin).
+
+