Datasheet

JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
6733 Myers Road
East Syracuse, NY 13057, USA
Phone: [phone]
1-800-554-5866
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumousa.com
Page 1/12
JUMO Quantrol LC100/LC200/LC300
Universal PID Controller Series
Brief description
The Quantrol series is available in the three DIN formats 48 mm x 48 mm, 48 mm x 96 mm, and
96 mm x 96 mm. It is used for two-state and three-state control applications as well as for the
control of regulating valves or SCR power controllers via a continuous controller output.
The universal analog input for RTD temperature probes, thermocouples, or current/voltage sig-
nals is user programmable. The setpoint value, the actual value, and all parameters are dis-
played on two seven-segment LED displays (red/green) with one or two decimal place(s). The
values can be displayed in °C or °F. Depending on the format, up to five relay outputs with a
switching capacity of 3 A / 230 V or up to four logic outputs 0/14 V are available. The switch po-
sition of the relays or logic outputs is displayed using yellow LEDs. Different functions can be as-
signed to these outputs. An analog output 0 to 10 V or 0(4) to 20 mA is configurable as
continuous controller output, actual value output, or setpoint value output. Using the binary input,
the device settings and operation can be locked, a ramp or the timer can be activated, or self-
optimization can be initiated. The supply voltage is optionally AC 110 to 240 V or AC/DC
20 to 30 V.
The controller has a ramp function with adjustable gradient for constant setpoint change. In ad-
dition, a special firing curve for small pottery kilns can be used which allows controlled starting
and time dependent firing. The user can enter setpoint values, gradient, and firing time directly
at the device.
The device can be connected to host systems or devices using the RS485 serial interface. In-
stead of operating the device from the front, the user can also program the controller using the
setup program and USB interface; this requires no additional voltage supply for the controller.
The Quantrol series, like all JUMO controllers, is also equipped with reliable JUMO self-optimi-
zation (autotuning).
LC100 (702031)
LC200 (702032)
LC300 (702034)
Block diagram
Options are delivered ex-factory acc. to the order details.
Option 1 Option 2 Option 3 Option 4
X X X X Relay output (N/O contact)
X X X X Logic output
X Analog output
X RS485 interface
Analog input
Binary input
Setup interface
Option 4*
Relay (N/O contact)
Option 3*
Option 2
Option 1
LC100
LC200
LC300
* Option for LC200/LC300
Special features
• 48 × 48, 48 × 96, 96 × 96 mm formats
• Two-state/three-state and continuous con-
troller
• Sensor monitoring
• Up to 5 outputs
• Self-optimization (autotuning) for exact PID
control
• Manual/automatic mode
• Configurable limit value monitoring (alarms)
• Setpoint changeover
• Level inhibit and key lock
• RS485 interface (Modbus RTU)
• Ramp and timer function
• Firing curve for pottery kilns
• Push-in controller insert
• Setup interface (USB Mini-B)
Approvals/approval marks (see "Technical data")
Data Sheet 702030
2013-09-23/00600565