Datasheet

V2.00/EN/00710338/2019-11-07
Page 12/24Data Sheet 706521
-802*PE+&R.*
'HOLYHU\DGGUHVV 0DFNHQURGWVWUDH
)XOGD*HUPDQ\
3RVWDODGGUHVV )XOGD*HUPDQ\
3KRQH 
)D[ 
(PDLO PDLO#MXPRQHW
,QWHUQHW ZZZMXPRQHW
-802,QVWUXPHQW&R/WG
-802+RXVH
7HPSOH%DQN5LYHUZD\
+DUORZ(VVH[&0'<8.
3KRQH 
)D[ 
(PDLO VDOHV#MXPRFRXN
,QWHUQHW ZZZMXPRFRXN
-8023URFHVV&RQWURO,QF
0\HUV5RDG
(DVW6\UDFXVH1<86$
3KRQH 
)D[ 
(PDLO LQIRXV#MXPRQHW
,QWHUQHW ZZZMXPRXVDFRP
70652100T10Z001K000
Screen
Electrical data
Type TFT color screen/TFT-touchscreen (resistive)
a
a
TFT color screens may have pixel errors due to technological and/or production-related reasons. Up to four pixel errors are deemed admissible
for this paperless recorder; they do not provide the ground for warranty claims.
Size 14.5 cm (5.7")
Resolution 640 × 480 pixels (VGA)
Number of colors 65536
Frame rate 60 Hz (type)
Brightness setting Adjustable on the device
Screensaver (switch-off) After waiting period or due to control signal
Voltage supply AC 110 to 240 V +10/-15 %, 48 to 63 Hz or
AC/DC 20 to 30 V, 48 to 63 Hz (not in conjunction with extra code 970)
Electrical safety According to DIN EN 61010-1
Overvoltage category II to 300 V mains voltage, pollution degree 2
Protection rating I with internal isolation from SELV
Power consumption
AC 110 to 240 V < 45 VA
AC/DC 20 to 30 V < 30 VA
Data backup Internal flash memory
Data buffering Battery (operating life > 7 years); additionally, storage capacitor for buffering during battery change
(buffer time approx. 2 minutes)
Time Battery-buffered real-time clock
Electrical connection On the back via push-in spring-cage terminals
Conductor cross section on terminal 5
Wire or stranded wire
without ferrule
Min. 0.2 mm
2
, max. 2.5 mm
2
Stranded wire with ferrule Min. 0.2 mm
2
, max. 2.5 mm
2
2 × stranded wire with twin
ferrule with plastic collar
Min. 0.5 mm
2
, max. 1.5 mm
2
(both stranded wires with identical cross section)
Stripping length 10 mm
Conductor cross section on terminals 4,
14, and 15
Wire or stranded wire
without ferrule
Min. 0.2 mm
2
, max. 2.5 mm
2
(with terminal cover: max. 1.5 mm
2
)
Stranded wire with ferrule Min. 0.25 mm
2
, max. 2.5 mm
2
(with terminal cover: max. 1.5 mm
2
)
Stripping length 10 mm
Conductor cross section on terminals 6 to
13
Wire or stranded wire
without ferrule
Min. 0.14 mm
2
, max. 1.5 mm
2
(with terminal cover: max. 0.5 mm
2
)
Stranded wire with ferrule Without plastic collar: min. 0.25 mm
2
, max. 1.5 mm
2
(with terminal cover: max. 0.5 mm
2
)
With plastic collar: min. 0.25 mm
2
, max. 0.5 mm
2
Stripping length 9 mm