Installation Instructions User Manual

21
5 Function check
When the paperless recorder is installed and connected, it can be started up.
After the supply voltage has been connected or switched on, the start screen
will appear briefly.
Start screen
After the end of the initialization phase, the visualization level is automatically
started.
Visualization
level
The recorder is now in recording mode.
Further steps
A
The instrument can be configured by an authorized person, either
from the instrument keys or by using the setup program. Additional
information about the configuration can be found in the Operating
Manual B 70.6560.0.
Afterwards, please check again that connection, configuration and
operational mode are correct.