Software PCS (B 70.9703.0) User Manual

7 Data transfer to device
54
7.5 Incorrect log-in to device
If you want to access a device from within the setup software, it is possible
that you are unable to log in to the device. The probable cause is that you are
not registered as a user (incorrect device-rights file) or the password for the
PC and device do not match, or the device password has expired (solution:
alter the password).
Incorrect
log-in
The following picture shows one possible example of an error message:
h Confirm the error message by clicking on the button.
A dialog window now appears, in which you can log in to a device by using a
valid device-user ID.
Save ID and
password in the
device list
If you set the option ( ), the ID and password will be saved, and then
automatically transmitted to the device when the next connection is made.
v See “Save ID and password” on Page 50.
The ID and password can also be removed from the device list (connection
properties) again.
Standard
user
Save ID and password.
H
The recorder is delivered ex-factory with an internal user list which
comprises two users.
User 1: Master Password: 9200
User 2: User Password: 0