Software PCC (B 70.9702.0) Manual

25
5 Device Management
Server
settings
Settings for SMTP server or POP3 server.
5.2 Adding devices
h Click a device to activate it.
h Start the menu function Edit
➔ New or click the icon ( ) in the toolbar.
The following text example assumes that the selected device is a paperless
recorder.
H
E-mail is sent via the SMTP server. The settings for the POP3
server are only needed if login is required on the e-mail server and
the server uses the "SMTP-after-POP“ procedure for
authentication.
You can obtain all necessary settings (IP address, port number,
login data) from the operator of the e-mail server.
IP address or host name of the
SMTP or POP3 server.
When the host name is entered, the
IP address can be determined by
clicking "Convert host name to
IP address“
(for information or to check
whether the host name can be
converted into an IP address).
Port number or port name for the
SMTP or POP3 service.
The port name is replaced while the
connection is being set up by the
predefined port number
(SMTP = 25; POP3 = 110).