Instruction Manual
Table Of Contents
- FCC Statement
- 1. Introduction
- 1.1. Product Introduction
- 1.2. Safety Guide
- 1.3. Symbol and text description
- 2. Recommended clinical application
- 3. Product Description
- 3.1. Standard Configuration
- 3.2. Product Introduction
- 3.3. Main interface (monitoring interface) descrip
- 3.4. Setting interface specification
- 4. Setting of monitor
- 4.1. Disassembly and installation and list of acce
- 4.2. Connect the power supply Charge
- 5. Operational Guidelines
- 5.1. Preparation before Use
- 5.2. FHR monitoring
- 5.3. TOCO monitoring
- 5.4. Manual FM monitoring
- 5.5. Monitoring information update
- 5.6. Restore Factory Settings
- 6. Maintenance and clean of Fetal Monitor
- 6.1. Product Handling
- 6.2. Maintenance
- 6.3. Cleaning and Disinfection
- 6.4. Gel
- 7. Packaging, transportation and storage
- 7.1. Packaging
- 7.2. Transport
- 7.3. Storage
- 8. Fault finding and eliminating
- 9. Warranty Period and Maintenance
- 10. Technical Parameters
- AppendixⅠ—Electromagnetic Compatibility Declaratio
30
0.15MHz and
80MHz)
from the equation applicable to
the frequency of the transmitter.
Recommended separation
distanced = 1.2 x
P
d = 1.2 x
P
80 MHz to 800
MHz
d = 2.3 x
P
800 MHz to
2.5GHz
where P is the maximum output
power rating of the transmitter
in
watts (W) according to the
transmitter manufacturer and d
is the recommended separation
distance in metres (m).
Field strengths from fixed RF
transmitters, as determined by
an electromagnetic site survey,
should be less than the
compliance level in each
frequency range. Interference
may occur in the vicinity
of equipment marked with the
following symbol:
Conducted
RF
IEC 61000-4-3
10 V/m
80 MHz to
2,7 GHz
10 V/m
Recommended separation distances between portable and mobile RF communications equipment and the
EQUIPMENT or SYSTEM – For EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING
Recommended separation distances between Portable and mobile RF communications equipment
and the JPD-300E
The JPD-300E is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the JPD-300E can help prevent electromagnetic interference
by maintaining a minimum distance between portable and mobile RF communications equipment
(transmitters) and the JPD-300E as recommended below, according to the maximum output power of the
communications equipment.
Ratings of the
transmitter
Max. Output Power
Separation distance according to frequency of transmitter
m
150kHz -80MHz
80MHz -800MHz
800MHz -2.5GHz