Instruction Manual
Table Of Contents
- FCC Statement
- 1. Introduction
- 1.1. Product Introduction
- 1.2. Safety Guide
- 1.3. Symbol and text description
- 2. Recommended clinical application
- 3. Product Description
- 3.1. Standard Configuration
- 3.2. Product Introduction
- 3.3. Main interface (monitoring interface) descrip
- 3.4. Setting interface specification
- 4. Setting of monitor
- 4.1. Disassembly and installation and list of acce
- 4.2. Connect the power supply Charge
- 5. Operational Guidelines
- 5.1. Preparation before Use
- 5.2. FHR monitoring
- 5.3. TOCO monitoring
- 5.4. Manual FM monitoring
- 5.5. Monitoring information update
- 5.6. Restore Factory Settings
- 6. Maintenance and clean of Fetal Monitor
- 6.1. Product Handling
- 6.2. Maintenance
- 6.3. Cleaning and Disinfection
- 6.4. Gel
- 7. Packaging, transportation and storage
- 7.1. Packaging
- 7.2. Transport
- 7.3. Storage
- 8. Fault finding and eliminating
- 9. Warranty Period and Maintenance
- 10. Technical Parameters
- Appendixâ… â€”Electromagnetic Compatibility Declaratio
13
Figure 4 Setting Up the Interface
Setting interface specification
WiFi settings: access to WiFi settings, the searched or type in hotspot can be connected, and the password of
WiFi needs to be entered.
Setting ID: access to set the Device ID of this device, the default ID is 00, and the optional range is 00 to 99.
FHR Warning: warning settings include upper FHR limit, lower FHR limit, warning switch, etc.
Host Version: View the current version of the host.
Probe version: view the current version of ultrasonic FHR probe.
Return: Return to the main interface.
Reset Password: Reset the password that entered the setup interface.
3.4.1. Access to Setup Interface
Long press shuttle button for 2 seconds to access to setting interface after entering 4 numbers of password on the
password entry screen (the default password is 1234), after the success of the password authentication, access to
setting interface from the main interface.