Instruction Manual
Table Of Contents
- FCC Statement
- 1. Introduction
- 1.1. Product Introduction
- 1.2. Safety Guide
- 1.3. Symbol and text description
- 2. Recommended clinical application
- 3. Product Description
- 3.1. Standard Configuration
- 3.2. Product Introduction
- 3.3. Main interface (monitoring interface) descrip
- 3.4. Setting interface specification
- 4. Setting of monitor
- 4.1. Disassembly and installation and list of acce
- 4.2. Connect the power supply Charge
- 5. Operational Guidelines
- 5.1. Preparation before Use
- 5.2. FHR monitoring
- 5.3. TOCO monitoring
- 5.4. Manual FM monitoring
- 5.5. Monitoring information update
- 5.6. Restore Factory Settings
- 6. Maintenance and clean of Fetal Monitor
- 6.1. Product Handling
- 6.2. Maintenance
- 6.3. Cleaning and Disinfection
- 6.4. Gel
- 7. Packaging, transportation and storage
- 7.1. Packaging
- 7.2. Transport
- 7.3. Storage
- 8. Fault finding and eliminating
- 9. Warranty Period and Maintenance
- 10. Technical Parameters
- AppendixⅠ—Electromagnetic Compatibility Declaratio
Statement
This manual prepared fully in accordance with the “General Instructions for operating manual of GB/T9969
industrial products” conforms to the national standards.
The contents of this manual are completely consistent with the actual situation of this monitor.
Shenzhen Jumper Medical Equipment Co., Ltd. (hereinafter referred to as Jumper Company) owns this
non-public manual copyright.
No person or organization shall reproduce, modify or translate this specification without the written consent of
Jumper Company.
This Manual includes Technical Specifications and Instruction Manuel.
WARRANTIES
In the event that the following conditions are met, Jumper Company will be responsible for the safety, reliability
and performance of the product:
（1）Use this product in accordance with the Instruction Manuel/Technical Specifications.
（2）The installation, maintenance and upgrade of the product shall be carried out by the personnel of Jumper
Company.
（3）The storage environment, working environment and electrical environment of the product are in accordance
with the manual.
（4）The serial number tag or manufacturing mark of the product shall be clear and identifiable. It is verified
through the appraisal of Jumper Company that this product is manufactured by Jumper Company.
（5）Damage caused by non-human factors
The products that are under the warranty service regulations of Jumper Company shall enjoy free service. As for
the products that are beyond the warranty service regulations, Jumper Company shall charge for the service. If the
products are transported to Jumper Company for maintenance, the user shall bear the freight (including the customs
expenses).