Instruction Manual
Table Of Contents
- FCC Statement
- 1. Introduction
- 1.1. Product Introduction
- 1.2. Safety Guide
- 1.3. Symbol and text description
- 2. Recommended clinical application
- 3. Product Description
- 3.1. Standard Configuration
- 3.2. Product Introduction
- 3.3. Main interface (monitoring interface) descrip
- 3.4. Setting interface specification
- 4. Setting of monitor
- 4.1. Disassembly and installation and list of acce
- 4.2. Connect the power supply Charge
- 5. Operational Guidelines
- 5.1. Preparation before Use
- 5.2. FHR monitoring
- 5.3. TOCO monitoring
- 5.4. Manual FM monitoring
- 5.5. Monitoring information update
- 5.6. Restore Factory Settings
- 6. Maintenance and clean of Fetal Monitor
- 6.1. Product Handling
- 6.2. Maintenance
- 6.3. Cleaning and Disinfection
- 6.4. Gel
- 7. Packaging, transportation and storage
- 7.1. Packaging
- 7.2. Transport
- 7.3. Storage
- 8. Fault finding and eliminating
- 9. Warranty Period and Maintenance
- 10. Technical Parameters
- AppendixⅠ—Electromagnetic Compatibility Declaratio
15
Figure 7 WiFi Configuration Interface
Figure 8 Static IP Setting Interface
2) After selecting the dynamic IP by default, the local area network will be automatically distributed IP to the device.
Select static IP, it will skip to the setting static IP interface, then could set fixed IP, subnet mask and default
gateway.
3) IP and port number in the configuration process are IP address and port number connected with the central
station.
4) Select type in, enter SSID and the corresponding password through virtual keyboard.
5) If there is no WiFi hotspot can be searched, select Re-Scan or exit the list.
6) Select “Back” to return back to the main interface (monitoring interface).