Instruction Manual
Table Of Contents
- FCC Statement
- 1. Introduction
- 1.1. Product Introduction
- 1.2. Safety Guide
- 1.3. Symbol and text description
- 2. Recommended clinical application
- 3. Product Description
- 3.1. Standard Configuration
- 3.2. Product Introduction
- 3.3. Main interface (monitoring interface) descrip
- 3.4. Setting interface specification
- 4. Setting of monitor
- 4.1. Disassembly and installation and list of acce
- 4.2. Connect the power supply Charge
- 5. Operational Guidelines
- 5.1. Preparation before Use
- 5.2. FHR monitoring
- 5.3. TOCO monitoring
- 5.4. Manual FM monitoring
- 5.5. Monitoring information update
- 5.6. Restore Factory Settings
- 6. Maintenance and clean of Fetal Monitor
- 6.1. Product Handling
- 6.2. Maintenance
- 6.3. Cleaning and Disinfection
- 6.4. Gel
- 7. Packaging, transportation and storage
- 7.1. Packaging
- 7.2. Transport
- 7.3. Storage
- 8. Fault finding and eliminating
- 9. Warranty Period and Maintenance
- 10. Technical Parameters
- Appendixâ… â€”Electromagnetic Compatibility Declaratio
16
3.4.3. Device ID
Figure 9 Device ID Interface
To distinguish different devices, set the number of the devices, select the different numbers by rotating the shuttle
button, after the selection, pressing the button to confirm exit by pressing Back to set the number of the device, the
settable range is 00 to 99.
3.4.4. FHR Warning
Figure 10 FHR Warning Interface
FHR Warning selects on, when the rate of FHR is abnormal for 15 seconds consecutively, exceeding the upper
limit and lower limit range of setting, the system makes warning sound, select off, and close the warning.