Instruction Manual
Table Of Contents
- FCC Statement
- 1. Introduction
- 1.1. Product Introduction
- 1.2. Safety Guide
- 1.3. Symbol and text description
- 2. Recommended clinical application
- 3. Product Description
- 3.1. Standard Configuration
- 3.2. Product Introduction
- 3.3. Main interface (monitoring interface) descrip
- 3.4. Setting interface specification
- 4. Setting of monitor
- 4.1. Disassembly and installation and list of acce
- 4.2. Connect the power supply Charge
- 5. Operational Guidelines
- 5.1. Preparation before Use
- 5.2. FHR monitoring
- 5.3. TOCO monitoring
- 5.4. Manual FM monitoring
- 5.5. Monitoring information update
- 5.6. Restore Factory Settings
- 6. Maintenance and clean of Fetal Monitor
- 6.1. Product Handling
- 6.2. Maintenance
- 6.3. Cleaning and Disinfection
- 6.4. Gel
- 7. Packaging, transportation and storage
- 7.1. Packaging
- 7.2. Transport
- 7.3. Storage
- 8. Fault finding and eliminating
- 9. Warranty Period and Maintenance
- 10. Technical Parameters
- AppendixⅠ—Electromagnetic Compatibility Declaratio
18
FM pen X 1
Probe bandage X 2
Power adapter X 1
Gel X 1
Instruction Manual
Warranty Card (included in this specification)
Certificate of Conformity
4.2. Connect the power supply Charge
4.2.1. Insert the DC plug of the power adapter into the power socket behind the device.
4.2.2. Insert the AC plug of the power cable into the power socket of Extranet.
4.2.3. The screen displays charging and this device can be used in charge.
5. Operational Guidelines
5.1. Preparation before Use
Long press the switch button for 2 seconds, the screen enters the main monitoring interface, remove the
ultrasonic probe, the TOCO probe and the FM pen from the host, if the FHR probe connection identifier and TOCO
probe connection identifier of the screen light up, it indicates the success of matching with the probe (if the match fails,
please rematch the probe back to the contact point).
5.2. FHR monitoring
5.2.1. Pregnant women should maintain an easy-to-monitor position, usually in a semi-supine position.
5.2.2. Pass the strap down the waist (two straps are required to monitor fetal heart rate and uterine pressure).
5.2.3. Apply proper amount of couplant on the surface of the ultrasonic probe, put the probe on the abdomen of the
pregnant woman, and make sure the probe and the abdomen of the pregnant woman are in good contact.