User Guide 15ft Trampoline & Enclosure Model: JK15VC2 The trampoline / enclosure is designed for users weighing 90kg (200lbs) or less. Got a Problem building your trampoline? Call us on 1-877-927-8777 8am - 5pm CT Monday to Friday and we can help WARNING: Read these assembly instructions carefully before attempting to assemble or use this product. Keep this user guide in a safe place for future reference.
15FT / 4.6 M TRAMPOLINE AND ENCLOSURE MODEL: JK15VC2 5 7 9 30 TRAMPOLINE ASSEMBLY PARTS LISTING . . . . . . . . . . . . . . . . . . 31 ENCLOSURE ASSEMBLY PARTS LISTING . . . . . . . . . . . . . . . . . .
Adequate overhead clearance is essential. A minimum of 7.3m (24ft) above the ground is recommended. Provide clearance for wires, tree limbs, and other possible hazards. Climb on and off the trampoline. It is a dangerous practice to jump from the trampoline to the floor or ground when dismounting, or to jump onto the trampoline when mounting. Do not use the trampoline as a springboard to other objects. Maintain at least 2.5m (8.2ft) on around all sides of the trampoline.
Stop bouncing by flexing knees as feet come in contact with the trampoline bed. Learn this skill before attempting others.
Thank you for selecting a Jumpking trampoline / enclosure. “Jumpking” is designed and crafted to provide many years of fun and fitness. This trampoline/enclosure comes equipped with warnings and instructions for the assembly, care, maintenance and use of the trampoline/enclosure. This information must be read by all trampoline supervisors and users before any person is allowed to use the trampoline/enclosure.
BUILDING YOUR TRAMPOLINE 1. This is a 2 person build. 2. Time for build is approximately 2 hours. 3. Choose a good location: (wood chippings, sand or grass). (7.3m) from ground level, away from wires, trees and other possible hazards. (2.5m) around sides, away from walls, fences, structures, roads and other hard surfaces and play areas.
PARTS LIST Part A Description: Top Tube with T-Connector A Quantity: 6 Part E Description: Stitched bed Quantity: 1 Part I Description: Top enclosure poles Quantity: 6 Part M Description: Cords Quantity: 8 Part B Part Description: Top Tube with T-Connector B Quantity: 6 Part Description: Leg extensions Quantity: 12 F Part Description: Springs Quantity: 96 Part Part G Description: Spring tool Quantity: 1 J Description: Bottom enclosure poles Quantity: 6 C Part K Description: Self ta
STEP 1 : ASSEMBLING THE FRAME A Top tube B You will need the following parts to complete section 1: Top tube 6 x Top Tubes with T-connector A - Part A 6 x Top Tubes with T-connector B - Part B Leg center 12 x Leg extensions - Part C 6 x Legs centers - Part D Leg extension A B First we will complete one of the four sections of the trampoline frame. Slot the narrow end of the top tube with T-connector A into T-connector B. Insert the leg extensions into the leg center.
Important: The frame is held together under tension so you will have to use some force to insert certain parts. Place your feet on the top tubes and grip the leg extension with both hands. Pull the extension until it can be slotted into the T-connection (1 Slot the end of leg extension into the T-connection (2 Push down on the end of the leg center to fully inset the leg extension into the T-connection. Repeat the last six steps until you have assembled the four sections of the trampolines frame.
STEP 2 : ASSEMBLING THE FRAME This step will require 2 people who must be wearing gloves. Slot two of the frame section together as shown in the diagram. Whilst one person holds the assembled sections upright, the other person can slot a third section onto the end of the assembled sections. You will now need to slot the frame together, this will take some force. The easiest method is if the two people face each other.
STEP 3 : FITTING THE STITCHED BED This step will require 2 people who must be wearing gloves and protective eye wear. Lay the stitched bed (with the V-Rings) part E out inside the frame of the trampoline with the warning labels facing upwards. Yellow stitching Locate the 4 V-Rings with the yellow stitching. These will be at 90º to each other. Slot one of the springs part F onto one of the yellow stitched V-Rings as shown. Important: springs must be slotted on the right way around.
Attach a spring to the opposite yellow stitched V-Ring. Important: You will now need to use the spring tool part G to attach the spring to the frame. Hook the spring tool onto end of spring, and pull until the spring can be slotted into the spring slot on the top of the frame. IMPORTANT: Ensure the spring is fully inserted into the slot on the top of the frame. Attach the other two yellow stitched V-Rings to the frame using the same method as shown in the previous two steps.
STEP 4 : FITTING THE FRAME PAD This step will require 2 people. Lay the frame pad - Part H out over the edge of the frame with the ties facing downwards. Align the openings in the frame pad with the T-connector B's on the frame. Tie the outer elastic straps on the underside of the frame pad around the top tubes of the frame. completed step 4. WARNING: The trampoline MUST NOT be used during construction.
STEP 5 : FITTING THE ENCLOSURE TUBES Top enclosure tube You will need the following parts to complete step 5: Bottom enclosure tube 6 x Top enclosure tubes - Part I 6 x Bottom enclosure tubes - Part J 6 x Hemisphere caps - Part N Self tapping screw and washer You will also need a cross-head screwdriver (not supplied). Cross-head screwdriver Slot the thin end of one of the bottom enclosure tubes into the open end of one of the top enclosure tubes.
Then place the Hemisphere cap Part N onto the top enclosure pole Part I. Slot the bottom enclosure tube into the tubes in the T-connector B tubes visible through the slots in the frame pad. Assemble the five remaining enclosure tubes using the five self tapping screws and the cross-head screwdriver. Slot the remaining enclosure tubes with hemisphere caps into the remaining T-connector B’s on the frame. completed step 5.
STEP 6 : FITTING THE ENCLOSURE NETTING You will need the following parts to complete step 6: Enclosure netting 1 x Enclosure netting - Part L Lay the enclosure netting out on the trampoline. Rod Find the ROD on top of enclosure netting. Stand on the trampoline and insert one of the exposed sections of the Black G4 pole into a plastic grip on top of one of the enclosure tubes.
5 6 Attach the three other exposed sections of the Black G4 pole to the other enclosure tubes in the order shown in the diagram. completed step 6.
STEP 7 : ATTACHING THE BOTTOM OF THE NET You will need the following parts to complete step 7: 8 x Cords - Part M. Tie the non-plastic end of the cord around a V-Ring. Push the red plastic end through a hole in the bottom of the netting. Important: Keep the cord tight at all times. Slot red plastic end of the cord through the middle of the next V-Ring along. Now slot the red plastic end back through the net and down through the next V-Ring.
USING THE TRAMPOLINE 2.5m 8.2ft Before using your trampoline, check again that there is enough clearance around it. Maintain a clear space of 2.5 metres (8.2 feet) on all sides of the trampoline. Also check that the area is free from walls, structures, fences, tarmac and other hard surfaces and other play areas. 7.3m 24ft Ensure that there is 7.3 metres (24 feet) clearance above the ground. Also check that there area no overhanging objects in the area above the trampoline.
17 to 27 29
JK15VC2 8 JK15V-TR8 8 JK15V-TR8 JK15V-TC JK15V-TCWS JK15V-LE JK15V-WL (Blue) 31
JK15VC2 HWSTS-S6 JK15V-EBP JK15V-ETP HWEPCAP-TCWS NET15-SP6/5.