GB Stereo Radio Art.No.: R AN..514.. R AN..914.. ALBRECHT JUNG GMBH & CO. KG Volmestrasse 1 58579 Schalksmühle, Germany mail.info@jung.de www.jung.
Safety instructions Caution! Electrical devices may only be installed and fitted by electrically skilled persons. Non-compliance with the installation information could cause damage to the device, fire or other hazards. Danger of electric shock. Before working on the device, disconnect the power or load and switch off the circuit breakers. Danger of electric shock. Loudspeaker connections and power supply may not be wired in one socket.
Function Correct use • • Installation in two concealed appliance boxes according to DIN EN 49073 (recommendation: deep boxes). VHF reception in the frequency range 87.
Automatic channel search • Press and hold the button's full surface (approx. 3 seconds). The long press will be acknowledged with a sound. The entire frequency range will be scanned and the four strongest channels saved (automatic memory assignment). iiMemory will be overwritten. Manual channel search Searching for channels in ascending/descending frequency. • Press button briefly. The next channel will be selected. Saving/overwriting favourite channel The desired channel frequency is selected.
In the LS series the installation can also be performed x2 and x3 in surface caps. The installation can be performed either vertically or horizontally. Vertical installation: loudspeaker on top (Fig. 2) left Horizontal installation: loudspeaker on left (Fig. 2) right Figure 2: Vertical and horizontal installation iiFor series A, CD and FD lever (6) position A, for series LS position B (Fig. 1). Additional loudspeaker Series A and CD: An additional loudspeaker must be fitted in a separate frame.
• Attach the radio with the frame to the insert. Ensure contact with the power supply. • Fasten radio to the supporting ring (3) with the enclosed plastic screws. Only tighten the plastic screws lightly. • Snap on covers (2). iiThe aerial is integrated. ! Danger! When connecting the loudspeakers or potential-free contact and power supply wires to a shared device socket, the loudspeakers or potentialfree contact cables may come into contact with mains voltage.
- + B A Figure 5: Connection of an external loudspeaker and potential-free contact -/+ External right loudspeaker connection A/B potential-free loudspeaker contact connection Start-up An automatic channel search takes place on the first start-up. The entire frequency range will be scanned and the four strongest channels saved in memory slots 1 to 4. Appendix Technical data Rated voltage: ...........................................................................................AC 230 V ~ Frequency: .....
Warranty We reserve the right to modify technical and formal characteristics of the product insofar as this supports technical progress. Our products are under guarantee within the scope of the statutory provisions. Please send the device, postage paid, to our central Customer Service Centre, with a description of the error. ALBRECHT JUNG GMBH & CO. KG Service Centre Kupferstr. 17-19 44532 Lünen Germany Telephone: +49 (0) 2355 80 60 Fax: +49 (0) 23 55 . 80 61 89 kundencenter@jung.
