Instruction Manual

Benefit from the advantages
Pioneers of 3-phase AC technology
More than 150,000 Jungheinrich
3-phase AC trucks are in use all over
the world. This depth of knowledge is
reflected in today’s drive and control
technology:
• Excellent productivity.
• Low energy consumption.
• Eective thermal economy.
• Reduced maintenance and wear.
High throughput levels
• 3-phase motors with high torque.
• High acceleration, rapid lift, dynamic
ancillary movements.
• Quiet traverse/pivot system with high
reach speeds.
• Diagonal travel speed settings as a
function of travel direction and height.
• Faster duty cycles through synchro-
nised traverse (optional).
Economic energy management
• Double energy-saving benefits through
regenerative braking and lowering.
• Longer operating times on a single
battery charge (up to 2 shifts).
• Shorter charge times.
• Active energy and battery manage-
ment.
• Longer battery service life.
• Battery rollers for rapid battery replace-
ment.
RFID ground control (standard)
• Truck control with transponder tech-
nology.
• Permanent route measuring for precise
identification of all warehouse areas.
• High flexibility regarding switching and
safety functions (aisle end stop, lift /
travel cut-outs, speed reductions)
• Optimisation of travel speed profile
relative to the floor topology.
Control and CAN-Bus system
• All movements and speeds can be set
and adjusted via software parameters.
• Electronically controlled drive wheel
brake and wear-free electromagnetic
multi-plate brake on the load wheels
(ETX 515).
Commissioning and maintenance
• Quick and reliable commissioning
through teach-in process.
• 1000 operating hours service interval.
• Electronics with wear-free sensor
system.
• The gear oil in maintenance-free and
sealed for life.
Reliable operation – high availability
• Robust and maintenance-free three-
phase AC drive systems - no wearing
parts.
• 70% fewer cables and plugs due to
CAN-Bus.
• Extremely torsion-resistant mast for
high residual capacities and low mast
sway.
Jungheinrich warehouse navigation
(optional)
• Linking the ETX to a Warehouse Man-
agement System (WMS) using a radio
data terminal or scanner.
• Direct acceptance of the destination in
the narrow aisle by the truck computer.
• Automatic vertical positioning.
• Automatic horizontal position control
system.
• Automatic stacking operation.
• Eective twin cycles.
• Elimination of incorrect positioning
through RFID location detection.
• Maximum flexibility in the warehouse,
as the existing WMS can be modified to
cater for warehouse extensions
T_ETX 513/515_052014_en_UK_000
Jungheinrich UK Ltd.
Head Oce:
Sherbourne House
Sherbourne Drive
Tilbrook
Milton Keynes MK7 8HX
Telephone [phone]
Fax [phone]
[e-mail]
www.jungheinrich.co.uk
Jungheinrich fork lift
trucks meet European
safety requirements.
The German production
facilities in Norderstedt and
Moosburg are certified.