Declaration of Conformity

2.4.5 Adding a New Set-up Transponder

Requirements

– The truck is switched on, see page 24.

Procedure

• Press the key below the "Settings"symbol

(6).

• Press the key below the "Change set-up

transponder" symbol (11). The set-up

transponder is requested.

• Place the set-up transponder on

thetransponder reader (4).

All transponder IDs are shown on the

display unit (3).

• Press the key below the "Add"symbol

(12).

• Place the new transponder on

thetransponder reader (4).

The new transponder ID must be different

from existing transponder IDs.

• Press the key below the "Confirm"symbol

(9).

The new transponder ID is displayed.

If the wrong transponder has been used,

delete the set-up transponder again, see

page 26, and add the correct set-up

transponder.

• To return to the main menu, press thekey below the "Back" symbol (10).

A new transponder has been added.

The transponder IDs saved are sorted first of all numerically and then

alphabetically.

Z Up to four set-up transponder IDs can be saved.