User's Manual

B. To Disable Password Lock
- In order to access NEXDISK that has a password lock mode enabled
Use program “NEXPASS.exe” and input password.
- Default password is “1234”. Password can be up to
20 alphanumeric characters.
- After password is input, NEXDISK is enabled for use.
★ CAUTION : Please do not forget your password. Only people that have the password can use the media.
Product 󰼿 Usage󰼿
A. Typical Usage
- Use just like a regular Hard Disk.
B. Booting Mode Option
- Configure CMOS Setup, 1
ST
BOOT DEVICE to be USB ZIP.
- When system is rebooted computer will boot from USB.
C. NEXDISK Usage in MS-DOS
- After copying MS-DOS boot files to the NEXDISK and boots from it, user is able to access contents of the
files from A:\ prompt.
Caut i on󰼿
1. Things that you need to remember while using NEXDISK
A. If you remove NEXDISK while the LED indicator is red, data might be lost or corrupted
.
B. It is impossible to use NEXDISK again if you lose your password, so please take caution not to forget
passwords.
C. JUNGSOFT is not responsible for lost data even if product is defective.
Please test the product initially.
2. Service
A. After purchase, Jungsoft will provide users with one year of tech support and product replacement. However,
mis-use of the product or damage caused by natural disaster will not be covered and users will be charged.
B. Damage caused by impact, water, and disassembly of the product is not covered by the service.