User's Manual

External Hardware Features
Chapter 2
Trapeze Mobility Point Installation Guide
10
External Antenna Connectors
The MP-422 has connectors for attaching optional external antennas. (See
Figure 2.) Table 1 lists the external antenna models.
Figure 3 shows some of the 802.11b/g antennas.
Table 1. Trapeze External Antenna Models
Model Type Gain
Beamwidth
Horizontal Vertical
ANT-7360 802.11a 8 dBi 360° 15°
802.11b/g 6 dBi 360° 25°
ANT-7360-OUT 802.11a 8 dBi 360° 15°
802.11b/g 6 dBi 360° 22°
ANT-5060
(ASTN6S)
1
1. The numbers in parentheses are the numbers that appear on the back of an 802.11a antenna’s reflector plate.
To verify an 802.11a external antenna’s model number, look for the number in parentheses.
802.11a 14.5 dBi 60° 14°
ANT-5120
(ASTN6T)
802.11a 12.5 dBi 120° 14°
ANT-5180
(ASTN6H)
802.11a 10.8 dBi 180° 14°
ANT-1060 802.11b/g 10 dBi 60° 65°
ANT-1120 802.11b/g 7 dBi 120° 60°
ANT-1180 802.11b/g 6 dBi 180° 40°
Note. The MP-422 radios are certified for use only with these external
antennas.
This equipment will be marketed and installed by specific contract retailer. The installation of this
equipment is only be performed by well-trained and qualified personnel.