User's Manual

Installing an MP-422
Chapter 3
Trapeze Mobility Point Installation Guide
28
9 Insert the Cat 5 cable(s) into the connector(s):
● For a single connection, use the connector for port 1.
● For redundancy, insert one cable into each connector.
10 Install the Kensington lock, if you plan to use one.
a Loop the Kensington lock’s cable around an object that cannot be moved
or damaged by a person pulling on the cable.
b Insert the key into the Kensington lock.
c Insert the Kensington lock into the security slot on the MP.
d Rotate the key right or left to secure the lock to the MP.
e Pull on the lock to verify that it is secured to the MP.
f Remove the key.
11 Lift the MP access point into place on the universal mounting bracket as
shown in Figure 12.
Make sure the cable feeds properly into the ceiling as you lift the device, and
does not become trapped between the access point and the bracket.
Figure 12. Step 10—Placing the MP Access Point on the Bracket
840-9502-0002