User's Manual

Installing an MP-422
Chapter 3
Installing and Connecting an MP-422
33
Figure 18. Step 6—Top View
Figure 19. Step 6—Bottom View
7 Pull the Cat 5 cable(s) about 15 cm (about 6 inches) out of the hole in the
ceiling tile and through the port connector opening to create enough slack to
insert the cable(s).
8 Insert the Cat 5 cable(s) into the connector(s):
● For a single connection, use the connector for port 1.
● For redundancy, insert one cable into each connector.
T- bar
T-bar clamps
(attached
to T-bar)
Universal mounting
bracket
840-9502-0012
(Viewed from above ceiling tiles, looking down.)
Port connector
opening
T- b a r
Universal mounting bracket
840-9502-0004
Port connector
opening