User's Manual

Installing an MP-422
Chapter 3
Installing and Connecting an MP-422
41
3 Unlock the universal mounting bracket from the MP access point by inserting
the 3-mm or 1/8-inch screwdriver into the Unlock hole on the MP access point
as shown in Figure 26.
Figure 26. Step 3—Unlocking the Bracket
4 Remove the bracket as shown in Figure 27.
Figure 27. Step 4—Removing the Bracket
Caution! To avoid damage to the MP access point’s lock mechanism
or electronic components, do not use excessive force when inserting a
tool into the Unlock or Lock hole.
840-9502-0011
840-9502-0008