User's Manual

Installing an MP-422
Chapter 3
Installing and Connecting an MP-422
45
Tabletop Installation
(For required mounting hardware and tools, see Table 4 on page 22.)
1 Reverse the universal mounting bracket:
a Unlock the universal mounting bracket from the MP access point by
inserting the 3-mm or 1/8-inch screwdriver into the Unlock hole on the
MP access point as shown in Figure 31.
Figure 31. Step 1a—Unlocking the Bracket
Caution! To avoid damage to the MP access point’s lock mechanism
or electronic components, do not use excessive force when inserting a
tool into the Unlock or Lock hole.
840-9502-0011