User's Manual

Installing an MP-422
Chapter 3
Trapeze Mobility Point Installation Guide
46
b Remove the bracket as shown in Figure 32.
Figure 32. Step 1b—Removing the Bracket
c Turn over the universal mounting bracket, then align the bracket over the
cable ports and the four mounting posts as shown in Figure 33.
Figure 33. Step 1c—Turning Over the Bracket
d Once the bracket is fully seated, lock the bracket onto the MP access point
by inserting the 3-mm or 1/8-inch screwdriver into the Lock hole on the
access point as shown in Figure 34.
840-9502-0008
840-9502-0061