User Manual

Installing an MP-620
Chapter 3
Installing and Connecting an MP-620 Access Point
23
Figure 9. Connecting External Antennas to the MP-620
Connecting Cables to the Unit
1 Attach the Ethernet cable to the Ethernet port on the MP-620.
2 For extra protection against rain or moisture, apply weatherproofing tape (not
included) around the Ethernet connector.
3 Be sure to ground the unit with an appropriate grounding wire (not included)
by attaching it to the grounding screw on the unit.
Note. The Ethernet cable included with the package is 30 m (100 ft) long. To
wire a longer cable (maximum 100 m, 325 ft), use the connector pinout
information in Appendix B.
Caution! Be sure that grounding is available and that it meets local and
national electrical codes. For additional lightning protection, use lightning rods,
lightning arrestors, or surge suppressors.
MP-620