Quick Start Guide
Table Of Contents
- MP-632
- Package Checklist
- Installing and Connecting an MP
- Installation Requirements and Recommendations
- Installing an MP-632
- Mounting the Unit
- Connecting External Antennas
- Multiple External Antenna Support
- Ethernet
- Connecting Cables to the Unit
- Connecting the Power Injector
- Aligning Antennas for Bridge or Mesh Links
- RSSI Meter Functionality
- Federal Communications Commission Interference Statement (United States)
- Canadian Department of Communications Industry Canada Notice (Canada)
Campus Connectivity MP Quick Start Guide
11
Trapeze Networks
5. Use the 2 small bolts and washers (included in kit) to tightly secure the MP-632 to the
pole-mounting bracket.
Mounting on Larger Diameter Poles
There is also a method for attaching the pole-mounting bracket to a larger diameter pole using two
adjustable steel band straps (not included in the kit). The two steel band straps can be threaded
through the rectangular holes in the bracket to secure it to a larger diameter pole. This method is
shown in the following figure.
Note:
This pole mounting procedure can also be used to attached the MP-632 unit to a
horizontal pole.