Router User Manual

ERX 8.0.x Hardware Guide
CAUTION: Do not chang e the IP address for the Ethernet interface that you are
using to commun
icate with the system. If you change the address, you will lose the
Telnet session.
SNMP
The system supports Simple Network Management Protocol (S NMP),
astandardma
nagement protocol for IP networks. You can configure
the system as an SNMP agent.
As an S N M P agent, the system provides access to mana geme nt information
that it maintains. See JUNOSe System Basics Configuration Guide, Chapter 4,
Configuring
SNMP for information on SNMP. See JUNOSe Command Reference
Guide A to M and JUNOSe Command Reference Guide N to Z for the commands
that are available for c onfiguring the system as an SNMP agent.
The Next Step
See “Ma intaining ERX Routers” on page 85.
82 The Next Step