Router User Manual

ERX 8.0.x Hardware Guide
antistatic bags. These actions help to protect modules from damage by e lectrostatic
discharge.
Removing SFPs
To remove the S
FPs:
1. Obtain an anti
static container for the SFPs you plan to remove. (See “Storing
Modules and Components” on p age 86.)
2. Put the antis
tatic wrist strap on your wrist, and connect the strap to the
ESD grounding jack on the system.
3. Disconnect t
he cables from one of th e SFPs on the mod ule.
4. Identify the release mechanism for the SFP.
Different SFPs use different release mechanisms. (See Figure 40.) Possible
release mechanisms include:
A button that you press inward
A ring that you press inward
A bar that you pull sideways, the n outward
A tab that you pull sideways, then outward
Figure 40: Possible Release Mechanisms on the SFP
Release bar, button,
or tab
Release ring
Transceiver
Release bar, button,
or tab
Module faceplate
g013435
5. Release the SFP and pull it out of the slot.
6. PlacetheSFPinanantistaticbag.
7. If you are u
sing the redundant port on the GE I/O module, repeat Steps 3–6 for
the other SFP.
94 Replacing SFPs on I/O Modules