Router User Manual

Installing Modules
Figure 21: Ejectors in the Closed Position
Closed

Opened

Closed

Opened

g013747
5. Carefully slide the module out of the chassis.
6. Place t
he mod ul e in its antistatic bag, being careful not to touch mod ule
components, pins, leads, or solde r connections.
7. Cover t
he empty chassis slot with a blank filler panel, and tighten the filler
panel’s captive screws using a Phillips screwdriver. Turn both screws several
times before tightening them completely.
If you remove an I/O mod ule and not the corresponding line module, the line module
reboots. Its status becom es inactive when you issue the show version command.
If you remove a line module and do not delete the corresponding
confi
guration, the status of the line module is listed a s not present
when you issue the show version command.
Removing a Line Module, SRP Module, or SRP I/O Module 47