Network Router User Manual

ManualsBrandsJuniper Networks ManualsNetwork RouterERX-310

About This Guide

This E-Series Installation and User Guide provides the information you

need to install and start the E-series router.

Note: If the information in the latest E-series Release Notes differs from the

information in this guide, follow the E-series Release Notes.

The E-series router is shipped with the latest system software installed. If

you need to install a future release or reinstall the system software, refer

to the procedures in Appendix B, Installing JUNOSe Software.

E-Series Routers

Five models of E-series routers are available:

• ERX-1440 router

• ERX-1410 router

• ERX-710 router

• ERX-705 router

• ERX-310 router

All models use the same software. For information about the differences

between the models, see Chapter 1, E-Series Overview.

In the E-series documentation, the term ERX-14xx models refers to both

the ERX-1440 router and the ERX-1410 router. Similarly, the term

ERX-7xx models refers to both the ERX-710 router and the ERX-705

router. The terms ERX-1440 router, ERX-1410 router, ERX-710 router,

ERX-705 router, and ERX-310 router refer to the speciﬁc models.

Summary of content (6 pages)

PAGE 1
About This Guide This E-Series Installation and User Guide provides the information you need to install and start the E-series router. Note: If the information in the latest E-series Release Notes differs from the information in this guide, follow the E-series Release Notes. The E-series router is shipped with the latest system software installed. If you need to install a future release or reinstall the system software, refer to the procedures in Appendix B, Installing JUNOSe Software.
PAGE 2
xvi About This Guide Audience This guide is intended for experienced system and network specialists working with E-series routers in an Internet access environment. Conventions Table 1 defines notice icons used in this guide, and Table 2 defines text conventions used throughout the book, except for command syntax. Table 3 provides command syntax conventions used primarily in the E-Series Command Reference Guide.
PAGE 3
Documentation E-Series Routers Table 2 Text conventions (except for command syntax) (continued) Convention Description Examples Italics • Emphasize words. • • Identify variables. There are two levels of access, user and privileged. • Identify chapter, appendix, and book names. • clusterId, ipAddress. • Appendix A, System Specifications. Table 3 Syntax conventions in Command Reference Guide Convention Description Examples Words in plain text Represent keywords.
PAGE 4
xviii About This Guide management access, and general troubleshooting. Describes SRP modules, line modules, and I/O modules available for the E-series routers, and provides information about the compatibility of line modules and I/O modules with software releases. Lists the layer 2 protocols, layer 3 protocols, and applications that line modules and their corresponding I/O modules support.
PAGE 5
Comments About the Documentation E-Series Routers MIBS Copies of the MIBs available in a software release are included on the JUNOSe Software CD (formerly ERX Edge Routers Software CD) and on the Web. Release Notes Release notes are included on the corresponding software CD and are available on the Web. In the Release Notes, you will find the latest information about features, changes, known problems, resolved problems, and system maximum values.
PAGE 6
xx About This Guide Contacting Customer Support For technical support, contact Juniper Networks at support@juniper.net, or at 1-888-314-JTAC (within the United States) or 408-745-9500 (from outside the United States).