Network Router User Manual

NOTE: After the power supply is turned on, it can take up to 60 seconds for status
indicators—such as the Status and Power LEDs—to show that the power supply is
functioning normally.
NOTE: It is recommended to issue the CLI command request system power-off when
you want to power off the device immediately after the device is powered on.
Powering Off the SRX210 Services Gateway
You can power off the services gateway in one of the following ways:
■ Graceful shutdown — Press and release the Power button. The device begins
gracefully shutting down the operating system and then powers itself off.
■ Immediate shutdown — Press the Power button and hold it for more than ten
seconds. The device immediately powers itself off without shutting down the
operating system.
NOTE: Do not press the Power button while the device is shutting down.
WARNING: Use the graceful shutdown method to halt, power off, or reboot the
services gateway. Use the immediate shutdown method as a last resort to recover
the services gateway if the services gateway operating system is not responding to
the graceful shutdown method.
CAUTION: Immediate shutdown can result in data loss and corruption of the file
system.
86 ■ Powering Off the SRX210 Services Gateway
SRX210 Services Gateway Hardware Guide