Network Router User Manual
Chapter 16
Performing Initial Software Configuration
on the SRX210 Services Gateway
This chapter includes the following topics:
■ SRX210 Services Gateway Software Configuration Overview on page 101
■ Performing Initial Software Configuration on the SRX210 Services Gateway Using
the CLI on page 104
■ Performing Initial Software Configuration on the SRX210 Services Gateway Using
the J-Web Interface on page 107
■ SRX210 Services Gateway Secure Web Access Overview on page 111
SRX210 Services Gateway Software Configuration Overview
This topic includes the following sections:
■ Preparing SRX210 Services Gateway for Configuration on page 101
■ Understanding Built-In Ethernet Ports on page 102
■ Mapping the Chassis Cluster Ports on page 102
■ Understanding Management Access on page 103
Preparing SRX210 Services Gateway for Configuration
When the SRX210 services gateway powers on, it tries to boot the JUNOS Software
from the default storage media. If the device fails to boot from the default storage
media, it tries to boot from the alternate storage media.
Table 37 on page 101 provides information on the storage media available on SRX210
services gateway.
Table 37: Storage Media on SRX210 Services Gateway
TypeStorage Media
Default; always presentInternal NAND flash
AlternateUSB storage device
SRX210 Services Gateway Software Configuration Overview ■ 101